The Vari-Fan and Vari-Cyclone are powered by a permanent magnet, TENV motor, with long life brushes.

At 12 VDC the 5-blade, 42 inches Vari-Fan will have approx. 60 rpm, moving 1500 CFM. When mounted at least 8ft. above the floor in an open room.

At 24 VDC the 5-blade Vari-Fan will have approximately 120 rpm, moving 2700 CFM. When mounted at least 8ft. above the floor in an open room.

In a close mount installation both the Vari-Fan and the Vari-Cyclone blades are approximately 10 inches from the ceiling, when mounted with the accompanying down rod the Vari-Fan blades are approximately 14 inches from the ceiling.

The Vari-Fan comes with the complete hardware to mount the fan close to the ceiling or on a down rod. The Vari-Fan comes with 5 blades but the customer can install it with four or five blades, it is drilled and tapped to take both configurations.

The Vari-Fan main body parts come in black only, but the fan is very easy to paint and comes with instructions on how to paint it.

The Vari-Fan main body parts are made from injection molded, glass filled ABS plastic.

The Vari-Fan blade arms are cast metal with a shiny brass plated finish.

The Vari-Fan blades are wood with a light oak finish on one side and a dark oak finish on the other.


Technical Information

Fan weight: Vari-Fan 11lbs. or 5 kg.
Shipping weight: 12 lbs. or 5.45kg.